Worcester Bosch Greenstar i 15, System Boiler

Comprises:
1 x Flue Turret Elbow
1 x 570mm Flue Duct
1x Weather Sealing Ring
1x Internal Collar

Comprises:
1x Flue Terminal Assembly
1x Weather Sealing Collar
1x Fire Stop Spacer
1x Vertical Adaptor

Comprises:
1x Terminal Elbow
1x Extension (500mm)
1x Outlet Assembly
1x Clamp Pack

Comprises:

1x Flue Turret Elbow
1x Weather Sealing Plate
1x Internal Plate
1030mm (125mm Daimeter) of Flue Duct Including Terminal

Comprises:
1x Flue Terminal Assembly
1x Weather Sealing Collar
1x Fire Stop Spacer
1x Vertical Adaptor

The DT10RF controls the times and temperatures of your heating and hot water.

You can set up to 6 time periods for your central heating: these will be the same for every day of the week. The times for your hot water can be different for each day of the week.

There are 2 parts to this control - a transmitter and receiver. They use radio frequency (RF) to communicate which means there is no additional wiring required to install them. The wall mounted transmitter controls the timing and temperature for your heating, the boiler mounted received controls the timings of your hot water.

The DT10RF also features a 'holiday function'. This allows you to suspend your normal heating and hot water times for the duration of your holiday and resume them on your return.

This digital timer allows you to set 3 separate time periods for heating and hot water.

It’s a 7 day timer which means that different times can be set for each day of the week.

The DT20 automatically sets the correct time of the day and also adjusts to Greenwich Mean Time/British Summer Time (GMT/BST) so that you don’t have to reset the time in spring and autumn.

It also features a ‘holiday function’. This allows you suspend your normal heating and hot water times for the duration of your holiday and resume them on your return.

Use with:
The DT20 can be used in conjunction with the FR10 Intelligent room thermostat to improve the boiler’s fuel efficiency.

Please note:
This control is compatible with all Greenstar combination boilers. It’s also compatible with Greenstar system boilers provided the optional integral diverter valve is used

The DT20RF controls the times and temperatures of your heating and hot water.

You can set 3 separate time periods per day for your central heating and 3 separate time periods for hot water per day. These can be different on each day of the week. You can also choose your target room temperature which will be the same for all time periods.

There are 2 parts to this control - a transmitter and receiver. They use radio frequency (RF) to communicate which means there is no additional wiring required to install them. The timer/receiver plugs into the boiler and is automatically activated by the wall mounted room thermostat/transmitter.

The DT20RF also features a 'holiday function'. This allows you suspend your normal heating and hot water times for the duration of your holiday and resume them on your return.

Worcester are the only manufacturer whose designs enable pipework to be run behind the boiler as standard and have taken this feature a step further with the pre-piping assembly kits. The pre-bent pipes have sawged-ends for easy soldering and will save you approximately 30 minutes on installation time. The kits contain:

• 22mm CH flow pipe
• 22mm CH return pipe
• 15mm mains water inlet pipe (not applicable to i System or CDi System kits)
• 15mm DHW outlet pipe (not applicable to i System or CDi System kits)
• 22mm gas inlet pipe
• earth bonding strip

Pre-piping assembly kits are designed for Greenstar i Junior, Si, CDi, i System and CDi System boilers